Control panel documentation

Aerobic Treatment Control Panel
CP-001-3-0003

Demand dose · UV disinfection · failsafe lockout. 120 VAC single phase. Built by Legacy Controls to UL 508A and supplied with Hydro-Action treatment systems.

Read first — two power feeds

This panel is fed by TWO separate 120 V circuits: main power and a dedicated control circuit that keeps the alarm live when the main breaker is off. Disconnect BOTH feeds and verify with a voltage tester before opening the panel.

Documents

Operation Manual Installation, wiring, operation, PRI-51 programming, troubleshooting, warranty · PDF Specification Sheet Ratings, protection matrix, supervision systems · PDF

At a glance

Model
CP-001-3-0003
Supply
120 VAC, 60 Hz, single phase — main power plus a dedicated control circuit
Compressor circuit
120 V, ½ HP max (10 FLA)
Demand pump circuit
120 V, 1 HP max (15 FLA)
Protection
Failsafe demand-pump lockout on air loss or UV fault. High water raises the alarm only, so the pump keeps lowering the level.
Enclosure
NEMA 4X polycarbonate, −20 °C to 50 °C
Compliance
UL 508A Listed · NSF/ANSI 40

Support & warranty

Technical support, warranty claims and service questions for this panel are administered by AKHA Manufacturing, LLC.

Toll free 800-370-3749 · Phone (574) 936-2542

2055 Pidco Dr. / P.O. Box 640, Plymouth, Indiana 46563